HKSpot - Powered by Discuz! Board

標題: [硬件] [FW - Videocardz] 輪到 Threadripper 開蓋了 [打印本頁]

作者: dom 時間: 2017-7-28 02:41 標題: [FW - Videocardz] 輪到 Threadripper 開蓋了

https://videocardz.com/71252/amd ... als-four-ryzen-dies

4粒 Zepplin

唔通......終極版會係

8c16T X4 = 32C64T 300W TDP

作者: Sandbo 時間: 2017-7-28 06:47

引用:

原帖由 dom 於 2017-7-28 02:41 發表
 https://videocardz.com/71252/amd ... als-four-ryzen-dies

4粒 Zepplin
唔通......終極版會係

8c16T X4 = 32C64T 300W ...

You are right:
http://www.tweaktown.com/news/58 ... disabled/index.html

[ 本帖最後由 Sandbo 於 2017-7-28 11:34 編輯 ]

作者: kevinyuri 時間: 2017-7-28 20:31

ES 4MCM,retail係2MCM

作者: tat0801 時間: 2017-7-29 10:51

引用:

原帖由 kevinyuri 於 2017-7-28 20:31 發表
ES 4MCM,retail係2MCM

即係如果功耗可以處理，有4M全開
但再低頻少少

作者: XT 時間: 2017-7-30 01:22

引用:

原帖由 tat0801 於 2017-7-29 10:51 發表

即係如果功耗可以處理，有4M全開
但再低頻少少

Best for multiple core 既野, 通常唔洗高頻
不過要高泛用性既 desktop, 的確 single thread with high freq 有優勢

作者: kevinyuri 時間: 2017-7-30 02:07

引用:

原帖由 tat0801 於 2017-7-29 10:51 AM 發表

即係如果功耗可以處理，有4M全開
但再低頻少少

插粒epyc落x399唔知著唔著到機

作者: qcmadness 時間: 2017-7-30 09:49

引用:

原帖由 kevinyuri 於 2017-7-30 02:07 發表

插粒epyc落x399唔知著唔著到機

應該唔得

作者: kevinyuri 時間: 2017-7-31 14:43

https://www.pcper.com/news/Proce ... ility-and-Preorders

As it turns out, AMD confirmed to us that only two of the dies on that substrate have working transistors on them and the other two are simply blank wafer pieces to help with the structural support of the heatspreader! In otherwords, there are two blank, worthess chunks of silicon on the part to keep the top from caving in. (Note that the two working dies are always going to be diagonal from each other.)

裝假狗

作者: XT 時間: 2017-7-31 21:33

引用:

原帖由 kevinyuri 於 2017-7-31 14:43 發表
https://www.pcper.com/news/Processors/AMD-Outs-Threadripper-1900X-8-cores-549-Details-Availability-and-Preorders

As it turns out, AMD confirmed to us that only two of the dies on that substrate have ...

兇 Intel

(但可能係堅野黎)

作者: qcmadness 時間: 2017-7-31 21:35

引用:

原帖由 XT 於 2017-7-31 21:33 發表

兇 Intel (但可能係堅野黎)

聽講連socket都一樣係為左慳成本喎

歡迎光臨 HKSpot (https://bbs.hk-spot.com/)