HKSpot - Powered by Discuz! Board

標題: [軟件] KM Player 係 Win 7 (64Bit) 同 Win XP (32Bit) 既問題 [打印本頁]

作者: kcwk 時間: 2010-4-30 12:53 標題: KM Player 係 Win 7 (64Bit) 同 Win XP (32Bit) 既問題

係同 config, software下, 影片下
以前用 XP (32Bit) 睇片無咩起格
而家轉左 7 仔睇片, 全程有少少格, 同無咁順暢
其實係唔係有os 唔同, 要另外安其他 software?

作者: qcmadness 時間: 2010-4-30 19:06

咩codec?

作者: kcwk 時間: 2010-4-30 23:33

引用:

Originally posted by qcmadness at 2010-4-30 19:06:
咩codec?

我只係安左ATI 10.3既 XCODE,
唔合算唔算....
其實我睇既係好普通既AVI, RMVB檔案...
係唔係唔需要咩CODEC...><

好似呢張圖咁
個妹妹塊面起晒格

作者: qcmadness 時間: 2010-5-1 03:50

好怪wor... 係咪codec有事?

作者: kcwk 時間: 2010-5-1 12:17

遲D等我安個POWER DVD睇下有無分別先><

作者: hkccw 時間: 2010-5-1 13:08

有無試過用purecode來set??

作者: 469394 時間: 2010-5-1 14:23

我無呢個情況喎 (不過我係裝埋 K-Lite Codec Pack)

作者: kcwk 時間: 2010-5-2 00:34

我無用過purecode同K-Lite Codec Pack ><
見K-Lite Codec Pack有分K-Lite Codec Pack 同K-Lite Mega Codec Pack
我應該用邊個?

另外, 我發現KM PLAYER係安左係C:\PROGRAM FILES(X86)
會唔伯因為行緊64BIT WIN用32BIT PROGRAM既問題?

作者: kcwk 時間: 2010-5-2 02:15

同一套片
用KM PLAYER會起格
用WM PLAYER會較為順滑

作者: pk1667 時間: 2010-5-2 16:25

引用:

Originally posted by kcwk at 2010-5-2 02:15:
同一套片
用KM PLAYER會起格
用WM PLAYER會較為順滑

d set 法都係一樣?

作者: onehitwonder 時間: 2010-5-2 19:05

codec 問題, 我岩岩轉左 windows 7 64bit
依家用 windows 7 codec pack, 加 real alternative 2.2 連埋既 media player classic
裝埋 coreavc 便基本上夠 .....

作者: kcwk 時間: 2010-5-3 09:25

引用:

Originally posted by pk1667 at 2010-5-2 16:25:

d set 法都係一樣?

兩個都係default setting

作者: kcwk 時間: 2010-5-3 09:26

引用:

Originally posted by onehitwonder at 2010-5-2 19:05:
codec 問題, 我岩岩轉左 windows 7 64bit
依家用 windows 7 codec pack, 加 real alternative 2.2 連埋既 media player classic
裝埋 coreavc 便基本上夠 .....

咁樣, 等我安多個codec試試先

作者: onehitwonder 時間: 2010-5-3 09:34

引用:

Originally posted by kcwk at 2010-5-3 09:26:

咁樣, 等我安多個codec試試先

我係比較愛用 media player classic 的 ....

windows 7 codec pack 已包基本 codec 如 xvid, vixd, ogg, 睇 mkv 果個 ha 咩 ... 同 ac3 之類
real alternative 可睇 rmvb, 唔駛裝 real player 呢件 "好野", 而且包埋 media player classic.
coreavc 2.0 support windows 7, 解 h264.

依家用 dvbviewer 都係用 coreavc codec, 睇高清台 (atv / tvb) cpu usage 約 15%, 算係咁 ... 唔駛裝 powerdvd 咁大舊.

以前晌 xp 時會裝 kcode lite, 不過我覺得 windows7 codec pack 重輕巧 d.
km player? 無用過 ..... 用 media player classic 好似樣果個 ?

作者: kcwk 時間: 2010-5-3 18:45

引用:

Originally posted by onehitwonder at 2010-5-3 09:34:

我係比較愛用 media player classic 的 ....
windows 7 codec pack 已包基本 codec 如 xvid, vixd, ogg, 睇 mkv 果個 ha 咩 ... 同 ac3 之類
real alternative 可睇 rmvb, 唔駛裝 real player 呢件 & ...

其實我已經安左
ati xcode
km player
real alternative
win 7 個個 codec pack ... 唔知係唔係default有 ><

但係都有問題

coreavc 行 a 有無問題?
見coreavc 好似支援 n 卡

作者: qcmadness 時間: 2010-5-3 22:52

引用:

Originally posted by kcwk at 2010-5-3 18:45:

其實我已經安左
ati xcode
km player
real alternative
win 7 個個 codec pack ... 唔知係唔係default有 ><

但係都有問題

coreavc 行 a 有無問題?
見coreavc 好似支援 n 卡

CoreAVC有硬解?

作者: onehitwonder 時間: 2010-5-4 00:39

引用:

Originally posted by kcwk at 2010-5-3 18:45:

其實我已經安左
ati xcode
km player
real alternative
win 7 個個 codec pack ... 唔知係唔係default有 ><

但係都有問題

coreavc 行 a 有無問題?
見coreavc 好似支援 n 卡

win7 codec pack
http://www.windows7codecs.com/

coreavc works well on my 4770

[ Last edited by onehitwonder on 2010-5-4 at 00:40 ]

作者: kcwk 時間: 2010-5-4 09:51

引用:

Originally posted by onehitwonder at 2010-5-4 00:39:

win7 codec pack
http://www.windows7codecs.com/

coreavc works well on my 4770

[ Last edited by onehitwonder on 2010-5-4 at 00:40 ]

先唔該你先
因為見 coreavc 要 sn no.
經友人介紹下用左另一個 software
安裝後雖然好似仲係掙少少
但明顯已有改善

再次唔該各位

作者: onehitwonder 時間: 2010-5-4 13:14

引用:

Originally posted by kcwk at 2010-5-4 09:51:

先唔該你先
因為見 coreavc 要 sn no.
經友人介紹下用左另一個 software
安裝後雖然好似仲係掙少少
但明顯已有改善

再次唔該各位

咁你裝 powerdvd 都要 XXYY 架啦

coreavc 已經比 pdvd "友善" 得多了 ...
唔會自帶一堆 XX

作者: kcwk 時間: 2010-5-4 15:35

引用:

Originally posted by onehitwonder at 2010-5-4 13:14:

咁你裝 powerdvd 都要 XXYY 架啦
coreavc 已經比 pdvd "友善" 得多了 ...
唔會自帶一堆 XX

我用左purecodec, 無裝 pdvd,
雖然 pdvd, coreavc 都搵d 有 sn既

不過只係可免則免

作者: Quinton 時間: 2010-5-5 18:55

我用Final codec+ Potplayer

作者: onehitwonder 時間: 2010-5-10 00:09

引用:

Originally posted by kcwk at 2010-4-30 12:53:
係同 config, software下, 影片下
以前用 XP (32Bit) 睇片無咩起格
而家轉左 7 仔睇片, 全程有少少格, 同無咁順暢
其實係唔係有os 唔同, 要另外安其他 software?

我最後發現呢個 Win7 起格問題應該係 Renderer 引起 ....
用 VMR7 / VMR9 應該可以解決 ....

Win7 default 個 renderer 好雞 .....

[ Last edited by onehitwonder on 2010-5-10 at 00:12 ]

作者: Tommi_Vercetti 時間: 2010-5-12 00:37

引用:

Originally posted by onehitwonder at 2010-5-10 00:09:

我最後發現呢個 Win7 起格問題應該係 Renderer 引起 ....
用 VMR7 / VMR9 應該可以解決 ....

Win7 default 個 renderer 好雞 .....

[ Last edited by onehitwonder on 2010-5-10 at 00:12 ]

其實轉用MPC-HC SVN / POT Player + EVR renderer已無格…

[ Last edited by Tommi_Vercetti on 2010-5-12 at 00:39 ]

作者: Tommi_Vercetti 時間: 2010-5-12 00:38

引用:

Originally posted by qcmadness at 2010-5-3 22:52:

CoreAVC有硬解?

ONISE --> 只限CUDA support VGA有硬解，主力為任何renderer (overlay, VMR7)都可玩硬解

作者: Richteralan 時間: 2010-5-12 10:33

tried KMP recently with their new beta version....

back to MPC-HC x64 with ffdshow x64

歡迎光臨 HKSpot (https://bbs.hk-spot.com/)