Board logo

標題: [硬件] 花畫面 [打印本頁]

作者: T12    時間: 2010-5-5 11:27     標題: 花畫面

用張ATI3450係咁,用底板G31又係咁,間曷性花畫面,唔通係個mon打柴!!!!

作者: fo2live    時間: 2010-5-5 11:36

似RAM 多D
你用膠擦擦下金手指先~~
作者: T12    時間: 2010-5-5 12:37

引用:
Originally posted by fo2live at 2010-5-5 11:36:
似RAM 多D
你用膠擦擦下金手指先~~
今晚試下
作者: ngotto    時間: 2010-5-5 12:44

睇乜花畫面
作者: bebird    時間: 2010-5-5 13:54

引用:
Originally posted by ngotto at 5/5/2010 12:44:
睇乜花畫面
when he sees nude body photos of his son "t".
作者: T12    時間: 2010-5-5 14:44

引用:
Originally posted by ngotto at 2010-5-5 12:44:
睇乜花畫面
有時就咁桌面都花得一餐
作者: qcmadness    時間: 2010-5-5 14:48

引用:
Originally posted by T12 at 2010-5-5 14:44:

有時就咁桌面都花得一餐
printscreen有無問題?
作者: 孔明    時間: 2010-5-5 14:58

onboard 花畫面, 可能RAM 都有D問題
你仲有冇後備卡可以插去試下
作者: sniperX    時間: 2010-5-5 15:13

Clock latency of the memory does not match your MB. Asrock?
作者: bebird    時間: 2010-5-5 16:32

引用:
Originally posted by 孔明 at 5/5/2010 14:58:
onboard 花畫面, 可能RAM 都有D問題
你仲有冇後備卡可以插去試下
樓主 has already use ATI3450 to test and got same result.
作者: bebird    時間: 2010-5-5 16:33

引用:
Originally posted by fo2live at 5/5/2010 11:36:
似RAM 多D
你用膠擦擦下金手指先~~

作者: 孔明    時間: 2010-5-5 16:42

引用:
Originally posted by bebird at 2010-5-5 16:32:

樓主 has already use ATI3450 to test and got same result.
如果唔係點解問佢仲有冇後備卡呢
作者: bebird    時間: 2010-5-5 17:01

引用:
Originally posted by 孔明 at 5/5/2010 16:42:

如果唔係點解問佢仲有冇後備卡呢
VGA card + on-board 同時有問題?
作者: onehitwonder    時間: 2010-5-5 17:25

會唔會係 mon ?
不過應該睇得出係 mon 壞定卡壞架 ?
雖然我唔知點形容, 但 .... 係唔同的.
otherwise 就係過熱 ? RAM 壞花畫面我比小見 ....
花屏向來我第一個反應都係 display 過熱多
作者: bebird    時間: 2010-5-5 17:54

引用:
Originally posted by onehitwonder at 5/5/2010 17:25:
會唔會係 mon ?
不過應該睇得出係 mon 壞定卡壞架 ?
雖然我唔知點形容, 但 .... 係唔同的.
otherwise 就係過熱 ? RAM 壞花畫面我比小見 ....
花屏向來我第一個反應都係 display 過熱多
except RAM, can it be MB chipset damaged?
作者: onehitwonder    時間: 2010-5-5 18:21

引用:
Originally posted by bebird at 2010-5-5 17:54:

except RAM, can it be MB chipset damaged?
呢個用第二塊版一試就知 .......
作者: fo2live    時間: 2010-5-5 21:10

引用:
Originally posted by bebird at 2010-5-5 16:32:

樓主 has already use ATI3450 to test and got same result.
addon card 都會用onboard ram share
所以onboard ram 好大機會有古惑
作者: dom    時間: 2010-5-6 00:51

引用:
Originally posted by T12 at 2010-5-5 14:44:

有時就咁桌面都花得一餐
Check 下 RAM ....
作者: T12    時間: 2010-5-6 09:20

引用:
Originally posted by sniperX at 2010-5-5 15:13:
Clock latency of the memory does not match your MB. Asrock?
yes,asrock
作者: T12    時間: 2010-5-6 09:23

引用:
Originally posted by dom at 2010-5-6 00:51:


Check 下 RAM ....
Check過,等2條ram對調,又擦過金手指,又試過單一條ram,都唔得
之前用左年幾都無事,唔通真係死MB
作者: bebird    時間: 2010-5-6 09:29

引用:
Originally posted by T12 at 6/5/2010 09:23:

Check過,等2條ram對調,又擦過金手指,又試過單一條ram,都唔得
之前用左年幾都無事,唔通真係死MB
upgrade platform la! 6 core is waiting for u!
作者: T12    時間: 2010-5-6 10:55

引用:
Originally posted by bebird at 2010-5-6 09:29:

upgrade platform la! 6 core is waiting for u!
not have money
作者: tamalemon    時間: 2010-5-6 11:16

引用:
Originally posted by bebird at 2010-5-6 09:29:

upgrade platform la! 6 core is waiting for u!
6 core la x2
作者: bebird    時間: 2010-5-6 13:49

引用:
Originally posted by T12 at 6/5/2010 10:55:

not have money
when u can sell yr 1199 @ 10.x, u hv $ la!
作者: T12    時間: 2010-5-6 14:02

引用:
Originally posted by bebird at 2010-5-6 13:49:

when u can sell yr 1199 @ 10.x, u hv $ la!
此蚊尼不同彼蚊尼
作者: T12    時間: 2010-5-7 18:50

係舊臺bid左塊板試下係咪MB壞
作者: qcmadness    時間: 2010-5-8 00:38

引用:
Originally posted by T12 at 2010-5-7 18:50:
係舊臺bid左塊板試下係咪MB壞

作者: Quinton    時間: 2010-5-8 00:43

咩板,睇下你唔要的話我可唔可以買返
作者: bebird    時間: 2010-5-8 18:10

引用:
Originally posted by T12 at 7/5/2010 18:50:
係舊臺bid左塊板試下係咪MB壞
good idea
作者: T12    時間: 2010-5-9 12:24

引用:
Originally posted by Quinton at 2010-5-8 00:43:
咩板,睇下你唔要的話我可唔可以買返
bid左DFI塊P45細板,不過唔知幾時有空玩
如果係G31轉P45板,便唔便重裝os?
作者: bebird    時間: 2010-5-9 13:39

引用:
Originally posted by T12 at 9/5/2010 12:24:

bid左DFI塊P45細板,不過唔知幾時有空玩
如果係G31轉P45板,便唔便重裝os?
i think no need. just after startup, reinstall chipset software. & if u use on-board VGA, uninstall it first before moving to P45.
作者: Quinton    時間: 2010-5-9 15:52

引用:
Originally posted by T12 at 2010-5-9 12:24:

bid左DFI塊P45細板,不過唔知幾時有空玩
如果係G31轉P45板,便唔便重裝os?
XP的話我有計....
作者: bebird    時間: 2010-5-9 16:58

引用:
Originally posted by Quinton at 9/5/2010 15:52:

XP的話我有計....
XuperXP?
作者: T12    時間: 2010-5-9 23:06

R頭!係Asrock就花畫面,係DFI就唔夾Ram
作者: Quinton    時間: 2010-5-9 23:40

引用:
Originally posted by T12 at 2010-5-9 23:06:
R頭!係Asrock就花畫面,係DFI就唔夾Ram
係咪DDRII.??洗唔洗借d比你??
似ram有問題
引用:
Originally posted by bebird at 2010-5-9 16:58:

XuperXP?
no...只係個小patch uninstall d driver
作者: T12    時間: 2010-5-10 07:45

引用:
Originally posted by Quinton at 2010-5-9 23:40:

係咪DDRII.??洗唔洗借d比你??
似ram有問題
有兩條,拆走其中一條就OK
引用:
no...只係個小patch uninstall d driver
換左板就咁開機就OK, driver都唔使重裝
作者: Quinton    時間: 2010-5-10 15:15

引用:
Originally posted by T12 at 2010-5-10 07:45:


有兩條,拆走其中一條就OK


換左板就咁開機就OK, driver都唔使重裝
咁可能係RAM...
作者: T12    時間: 2010-5-12 12:28

引用:
Originally posted by Quinton at 2010-5-10 15:15:

咁可能係RAM...
人都癲,對ram拆開2條教work,夾埋就唔得
又要買過對ram,破產
作者: ngotto    時間: 2010-5-12 12:35

引用:
Originally posted by T12 at 2010-5-12 12:28:

人都癲,對ram拆開2條教work,夾埋就唔得
又要買過對ram,破產
無保咩?
作者: bebird    時間: 2010-5-12 13:17

引用:
Originally posted by T12 at 12/5/2010 12:28:

人都癲,對ram拆開2條教work,夾埋就唔得
又要買過對ram,破產
upgrade to AM3 la!
作者: T12    時間: 2010-5-12 13:47

引用:
Originally posted by ngotto at 2010-5-12 12:35:

無保咩?
Kingston終保,但條ram無壞
作者: T12    時間: 2010-5-12 13:48

引用:
Originally posted by bebird at 2010-5-12 13:17:

upgrade to AM3 la!
$
作者: qcmadness    時間: 2010-5-12 13:48

引用:
Originally posted by T12 at 2010-5-12 13:47:

Kingston終保,但條ram無壞
分開得, 夾埋唔得, 咁不如set鬆timing / lower freq
作者: onehitwonder    時間: 2010-5-12 13:48

引用:
Originally posted by T12 at 2010-5-9 12:24:

bid左DFI塊P45細板,不過唔知幾時有空玩
如果係G31轉P45板,便唔便重裝os?
first boot 入 safe mode 先 ~
正路 G31 無乜 chipset driver ?
可以 uninstall 既 un 哂先
之後起機等佢 detect 過.
作者: onehitwonder    時間: 2010-5-12 13:50

我有 2 條海盜 DDR2 667 512mb
有事可問我借
作者: ngotto    時間: 2010-5-12 14:00

引用:
Originally posted by T12 at 2010-5-12 13:47:

Kingston終保,但條ram無壞
都去試試啦,我試過一次用memtest無試,但用vista memory test就試到有事
作者: Quinton    時間: 2010-5-12 14:20

DDR2我有 3GB係度...有需要開聲
作者: 河本鬼茂    時間: 2010-5-12 14:27

引用:
Originally posted by fo2live at 2010-5-5 11:36:
似RAM 多D
你用膠擦擦下金手指先~~
邊款擦紙膠好用d?
作者: T12    時間: 2010-5-12 15:27

引用:
Originally posted by qcmadness at 2010-5-12 13:48:

分開得, 夾埋唔得, 咁不如set鬆timing / lower freq
我己經行df
作者: onehitwonder    時間: 2010-5-12 15:51

引用:
Originally posted by 河本鬼茂 at 2010-5-12 14:27:


邊款擦紙膠好用d?
都要小心擦 ..
見過人金手指都擦甩左一忽 ....
作者: T12    時間: 2010-5-12 18:59

插左對A-DATA試,暫時一切正常,吹漲!
作者: qcmadness    時間: 2010-5-12 19:59

引用:
Originally posted by T12 at 2010-5-12 15:27:

我己經行df
我指慢過default
作者: onehitwonder    時間: 2010-5-12 21:03

引用:
Originally posted by T12 at 2010-5-12 18:59:
插左對A-DATA試,暫時一切正常,吹漲!
都話 kingston ...... 邪邪地... 唔超唔谷都會死
依家我用緊 ADATA gameing series
作者: T12    時間: 2010-5-12 22:27

引用:
Originally posted by onehitwonder at 2010-5-12 21:03:


都話 kingston ...... 邪邪地... 唔超唔谷都會死
依家我用緊 ADATA gameing series
我都係裝左對gameing series
作者: onehitwonder    時間: 2010-5-12 22:46

引用:
Originally posted by T12 at 2010-5-12 22:27:

我都係裝左對gameing series
依家 2 號機係 DDR2 800 Gaming
主機係 DDR3 1600 Gaming
作者: T12    時間: 2010-5-13 08:23

引用:
Originally posted by onehitwonder at 2010-5-12 22:46:


依家 2 號機係 DDR2 800 Gaming
主機係 DDR3 1600 Gaming

米王
作者: bebird    時間: 2010-5-13 09:09

引用:
Originally posted by onehitwonder at 12/5/2010 22:46:


依家 2 號機係 DDR2 800 Gaming
主機係 DDR3 1600 Gaming
主機係 DDR2 800 Gaming
作者: T12    時間: 2010-5-13 13:47

哈!原來我對gameing series 係1066
作者: bebird    時間: 2010-5-13 14:38

引用:
Originally posted by T12 at 13/5/2010 13:47:
哈!原來我對gameing series 係1066
rice king
作者: Quinton    時間: 2010-5-14 19:15

我都要拎對DDR3 去補...kingston 代理係邊?
作者: qcmadness    時間: 2010-5-14 19:37

引用:
Originally posted by Quinton at 2010-5-14 19:15:
我都要拎對DDR3 去補...kingston 代理係邊?
Viewking or Synnex?
作者: T12    時間: 2010-5-15 08:31

引用:
Originally posted by qcmadness at 2010-5-14 19:37:

Viewking or Synnex?
kingston 代理得Viewking一個乍bo,联强係賣水貨
作者: T12    時間: 2010-5-15 13:42

固態復盟
作者: 河本鬼茂    時間: 2010-5-15 14:01

引用:
Originally posted by T12 at 2010-5-15 08:31:

kingston 代理得Viewking一個乍bo,联强係賣水貨
聯強係中國代理之一,可能聯強覺得香港屬中國一部分,所以打正旗號照賣。
作者: Quinton    時間: 2010-5-15 15:22

引用:
Originally posted by qcmadness at 2010-5-14 19:37:

Viewking or Synnex?
Viewking
作者: onehitwonder    時間: 2010-5-15 23:04

引用:
Originally posted by T12 at 2010-5-15 13:42:
固態復盟
壞版 ?
作者: T12    時間: 2010-5-15 23:32

引用:
Originally posted by onehitwonder at 2010-5-15 23:04:


壞版 ?
新板/新ram/將條DVI轉返用D-sub都唔得,睇黎係個Mon唔得
作者: 河本鬼茂    時間: 2010-5-16 02:22

引用:
Originally posted by T12 at 2010-5-15 23:32:

新板/新ram/將條DVI轉返用D-sub都唔得,睇黎係個Mon唔得
換Mon啦,一了百了。
作者: ngotto    時間: 2010-5-16 17:47

引用:
Originally posted by T12 at 2010-5-15 23:32:

新板/新ram/將條DVI轉返用D-sub都唔得,睇黎係個Mon唔得
我有個spare mon,要唔要拎去試下?
作者: T12    時間: 2010-5-17 09:05

引用:
Originally posted by ngotto at 2010-5-16 17:47:

我有個spare mon,要唔要拎去試下?
我可以插落部TV都試,但唔得閒搞
作者: bebird    時間: 2010-5-17 13:32

引用:
Originally posted by T12 at 17/5/2010 09:05:

我可以插落部TV都試,但唔得閒搞
u hv chance to change to 24" LCD mon la why my 17" is still working
作者: T12    時間: 2010-5-17 22:00

引用:
Originally posted by bebird at 2010-5-17 13:32:

u hv chance to change to 24" LCD mon la why my 17" is still working
我都係17"乍
作者: T12    時間: 2010-5-25 18:09

己經證實死mon
作者: Quinton    時間: 2010-5-25 20:50

引用:
Originally posted by T12 at 2010-5-25 18:09:
己經證實死mon
T神買幾多隻24"???
作者: ngotto    時間: 2010-5-25 22:15

引用:
Originally posted by T12 at 2010-5-25 18:09:
己經證實死mon
Eizo gogogo
作者: sniperX    時間: 2010-5-25 22:54

引用:
Originally posted by ngotto at 2010-5-25 22:15:

Eizo gogogo
Eizo 40K gogogo!
作者: bebird    時間: 2010-5-26 11:15

引用:
Originally posted by T12 at 25/5/2010 18:09:
己經證實死mon
20" mon is not expensive la!
作者: ngotto    時間: 2010-5-26 15:09

引用:
Originally posted by bebird at 2010-5-26 11:15:

20" mon is not expensive la!
at least 24" to T god la
作者: T12    時間: 2010-5-26 22:19

引用:
Originally posted by ngotto at 2010-5-26 15:09:

at least 24" to T god la
買部netbook算
作者: ngotto    時間: 2010-5-26 22:55

引用:
Originally posted by T12 at 2010-5-26 22:19:

買部netbook算
你会後悔
作者: T12    時間: 2010-6-6 18:51

個MON今日的起心干自己整返好了




歡迎光臨 HKSpot (https://bbs.hk-spot.com/) Powered by Discuz! 6.0 Lite