HKSpot - Powered by Discuz! Board

標題: [硬件] 放棄起頻了 [打印本頁]

作者: T12 時間: 2010-8-12 13:43 標題: 放棄起頻了

超同唔超都用唔出分別,超黎做乜?

作者: RT 時間: 2010-8-12 13:47

引用:

原帖由 T12 於 2010-8-12 13:43 發表
超同唔超都用唔出分別,超黎做乜?

咩叫「起」頻 ?

不嬲都唔超, 部機唔超都夠我用 . . .

作者: dom 時間: 2010-8-12 14:55

引用:

原帖由 T12 於 2010-8-12 13:43 發表
超同唔超都用唔出分別,超黎做乜?

老實講
依家 CPU 行 Default 都好夠力

作者: 紙羊 時間: 2010-8-12 15:06

我會超少少囉, 但唔會大超

作者: wai-3-love 時間: 2010-8-12 15:09

引用:

原帖由 RT 於 2010-8-12 01:47 PM 發表

咩叫「起」頻 ?

不嬲都唔超, 部機唔超都夠我用 . . .

起錨新力作

作者: LKNim 時間: 2010-8-12 16:18

換完C3 CPU
終於可以AM3跑XMP設定DDR3 1800C9 1.35V
慳電機

作者: ccw 時間: 2010-8-12 17:23

For me, I don\'t really overclock for much higher performance,
I will just spend some time at the beginning t gain as much as I can.
For example, when I was using my E6850(default 3GHz), i just overclock it and find that it can operate at 3.4GHz without losing stability, I just adopt it and will not push it to further.

作者: Aware 時間: 2010-8-12 17:34

引用:

原帖由 ccw 於 2010-8-12 17:23 發表
For me, I don\'t really overclock for much higher performance,
I will just spend some time at the beginning t gain as much as I can.
For example, when I was using my E6850(default 3GHz), i just o ...

for me, I found that 3.8GHz is a sweet point for i7 - 920, for both power consumption and heat generated.
speed over 3.8GHz just rise the heat and power rapidly with little performance gained.

作者: dom 時間: 2010-8-12 18:21

For me
I keep my 955BE @ 3.6GHz , any further "push" will result more "heat" than performance gain

1090T 既話可能會推高少少上到 3.8GHz @ 六核

作者: T12 時間: 2010-8-12 22:20

我用WinXP乍

歡迎光臨 HKSpot (https://bbs.hk-spot.com/)