Board logo

標題: [硬件] Cisco Layer 3 Switch 問題 [打印本頁]

作者: irvingtin    時間: 2010-10-12 12:44     標題: Cisco Layer 3 Switch 問題

公司用緊 Cisco 24 port 3750 switch with routing 功能
而加想行 MAC address filter
應該係 switchport port-security
如果用 switchport port-security mac-address sticky
佢會自己學 MAC address
問題係:

1. 加左個D Mac address 點先可以 disable 返???
2. 如果我 set 左  switchport port-security maximum 100, 咁佢學左 50個 mac address 之後, 我 no switchport port-security mac-address sticky 去 disable 佢, 發現新加既機佢都可以上到 network, 睇返個 sh port-security address 又唔見佢喎, 唔通個 maximun 一定要等於咁多個 Mac address???
作者: hungjoyee    時間: 2010-10-12 13:21

依篇會啱你

http://www.freeccnaworkbook.com/ ... witchport-security/
作者: irvingtin    時間: 2010-10-12 14:18

引用:
原帖由 hungjoyee 於 2010-10-12 13:21 發表
依篇會啱你

http://www.freeccnaworkbook.com/ ... witchport-security/
THX
不過佢無講個2個問題
我已搵到點解唔可以 delete MAC address, 因為當 no switchport port-security mac-address stricky 之後, 佢會轉做 securedynamic, 要用 clear port-security dynamic address 先可以

不過另一個問題係, 點由 dynamic 轉做 static???
另外, 第2個問題都係唔知點解決.....
作者: hungjoyee    時間: 2010-10-12 16:58     標題: 回復 #3 irvingtin 的帖子

我要搵個IOS 望先可以答你
作者: irvingtin    時間: 2010-10-12 18:07

引用:
原帖由 hungjoyee 於 2010-10-12 16:58 發表
我要搵個IOS 望先可以答你
many thx~~

大陸人真係咩都會做
已經發現有幾部私人 notebook
而咁岩公司就中左毒




歡迎光臨 HKSpot (https://bbs.hk-spot.com/) Powered by Discuz! 6.0 Lite