HKSpot - Powered by Discuz! Board

標題: [硬件] 25nm ssd [打印本頁]

作者: cheungmanhoi 時間: 2011-2-13 14:05 標題: 25nm ssd

仲差過34nm
又唔平

作者: LKNim 時間: 2011-2-13 14:52

Any news?

作者: cheungmanhoi 時間: 2011-2-13 15:33

ocz vertex2 有35nm版你去查下呀手機沒Record

作者: LKNim 時間: 2011-2-13 15:56

睇落真係幾差下
到Intel出果陣應該會好大改善

作者: ccw 時間: 2011-2-13 22:39

In fact how bad the 25mm SSDs of OCZ are?
I heard some noises on OCZ forum but did not bother to make that clear.
It seems the speed is dropped to ~250MB R/W from 34nm's ~280MB/s.
Is there anything else?

作者: cheungmanhoi 時間: 2011-2-13 23:47

引用:

原帖由 ccw 於 2011-2-13 22:39 發表
In fact how bad the 25mm SSDs of OCZ are?
I heard some noises on OCZ forum but did not bother to make that clear.
It seems the speed is dropped to ~250MB R/W from 34nm's ~280MB/s.
Is there anything el ...

vol 小左

作者: ccw 時間: 2011-2-13 23:58

引用:

原帖由 cheungmanhoi 於 2011-2-13 23:47 發表

vol 小左

ic, maybe due to technical immaturity.
Btw, some admins in OCZ forums said that OCZ Vertex 3 will be available soon, maybe within 30 days.

作者: cheungmanhoi 時間: 2011-2-14 00:12

bomb

Source? Intel rip

作者: ccw 時間: 2011-2-14 00:31

引用:

原帖由 cheungmanhoi 於 2011-2-14 00:12 發表
bomb

Source? Intel rip

FYI,
http://www.ocztechnologyforum.co ... highlight=beta+team

作者: LKNim 時間: 2011-2-14 17:10

容量剩係SF先會姐
Intel應該唔會,不過果幾G我又唔介意,睇$/GB先算

作者: 刺青 時間: 2011-2-14 18:07

25nm 好像寫入次數仲要比而家普及果D低 ?

作者: tat0801 時間: 2011-2-14 23:18

Adata S599路過

歡迎光臨 HKSpot (https://bbs.hk-spot.com/)