Board logo

標題: [硬件] AMD Llano 超頻參考 [打印本頁]

作者: dom    時間: 2011-7-3 02:58     標題: AMD Llano 超頻參考

http://www.xtremesystems.org/for ... ection-thread/page3
引用:
I tested with unlocked parts beyond the 47 limit at ref clock......

preety much LLanos limit was 5200 on ln2, voltage scaling was poor.

Anything far off from 5200 is BS

Not only is there multiplier bugs there is ref clock bugs........ref clock thinks it's changed but it's really not so some of those uber ram clocks and WR's some are claiming are BS. The program is being tricked.

Going to have to wait till software reads these parts correctly.

Avg clocks on air/water = 3600-3700 all at stock volts to.

Phase IIRC i tested around -40 on ln2, got you to 4.2 ish stock volts.

Avg ln2 clocks = 5000-5200 at 1.7v........higher pissed off chips also the jump in volts was only to gain 200 mhz.......cold scaled more than volts.

Avg ref clocks are much lower on many boards for boot making some of the speeds people are posting unrealistic for a 24/7 bootable rig.

Max avg ref clocks are 125ish unless we some some great strides in bios's, symptoms you will find booting high, lost HD in boot.
Chew* 大好少老點.......之前A 記比賽 我都係睇參考佢d post 超NB 優化效能
鎖倍頻 + PCIe 關系下 , 125 X 29 (A8-3850) 摸頂
作者: Tommi_Vercetti    時間: 2011-7-3 04:27

引用:
原帖由 dom 於 2011-7-3 02:58 發表
http://www.xtremesystems.org/for ... ection-thread/page3


Chew* 大好少老點.......之前A 記比賽 我都係睇參考佢d post 超NB 優化效能
鎖倍頻 + PCIe 關 ...
http://www.hardwarecanucks.com/f ... its-desktop-23.html

RAM + VGA超到好勁,但要睇埋AMD幾時先肯整Llano BE版鳥
作者: dom    時間: 2011-7-3 11:32

引用:
原帖由 Tommi_Vercetti 於 2011/7/3 04:27 發表


http://www.hardwarecanucks.com/f ... its-desktop-23.html

RAM + VGA超到好勁,但要睇埋AMD幾時先肯整Llano BE版鳥
http://www.anandtech.com/show/44 ... lano-overclocking/4
難超




歡迎光臨 HKSpot (https://bbs.hk-spot.com/) Powered by Discuz! 6.0 Lite