Originally posted by P+Donald at 2005-10-30 22:52:
仲係度XX-D43, 過晒時啦, 平RAM而家係UCCC最好超.
果20X mhz行到2-2-2-x 仲要加壓就以為好勁, 真係笑爆咀
Originally posted by 真.飛鳥 at 2005-10-30 23:27:
PQI 有時都可以 DDR400 CL2
Originally posted by P+Donald at 2005-10-30 23:33:
我屋企條垃圾都得啦, pqi黎, 2-3-3-6 2.5V, 有幾叻
Originally posted by qcmadness at 2005-10-30 23:34:
加voltage?
Originally posted by P+Donald at 2005-10-30 23:33:
我屋企條垃圾都得啦, pqi黎, 2-3-3-6 2.5V, 有幾叻
Originally posted by qcmadness at 2005-10-30 23:34:
加voltage?
Originally posted by Henry at 2005-10-31 09:01:
2-3-3同2-2-2既要求差好遠.
Originally posted by Totti at 2005-10-31 17:32:
UCCC好咩UTT/BH-5/TCCD叫咩
Originally posted by 真.飛鳥 at 2005-10-31 17:11:
不過我諗加少少 V 就得
Originally posted by BeleBala at 2005-10-31 21:43:
BH-5 唔係番生咩??
Originally posted by Totti at 2005-10-31 22:08:
UTT=BH-5....etc
Originally posted by P+Donald at 2005-10-31 20:09:
我加到3.2v唔信超唔到
Originally posted by 蕃茄先生 at 2005-11-3 15:33:
其實CL 2 / 2.5 / 3 差幾遠倒呢???
Originally posted by qcmadness at 2005-11-3 15:35:
大部份application 2% 以內
Originally posted by 蕃茄先生 at 2005-11-3 15:43:
為左2%
真係想講一大堆#$@%#%!
Originally posted by qcmadness at 2005-11-3 15:44:
所以pqi c/p 最高
Originally posted by 蕃茄先生 at 2005-11-3 15:49:
我都仲係用三星 cl 得3
Originally posted by qcmadness at 2005-11-3 15:56:
pqi平靚正
Originally posted by 蕃茄先生 at 2005-11-3 16:02:
三星底板有乜事冇得賴係ram問題
Originally posted by qcmadness at 2005-11-3 15:44:
所以pqi c/p 最高
Originally posted by 真.飛鳥 at 2005-11-3 16:16:
DDR400 CL2
Originally posted by Totti at 2005-11-3 16:22:
2-4-4-8都係無意思
Originally posted by Henry at 2005-11-3 20:32:
Even 3-2-2-6比2-3-2-6快.
歡迎光臨 HKSpot (https://bbs.hk-spot.com/) | Powered by Discuz! 6.0 Lite |