Board logo

標題: [軟件] Remote destop問題 [打印本頁]

作者: Evolution    時間: 2012-1-19 20:06     標題: Remote destop問題

用緊1043nd 已經加左Port Triggering 3389
用192.168.1.x連得到 但係網外就連唔到
想問漏左邊部份settings未做?
作者: ccw    時間: 2012-1-19 20:07

引用:
原帖由 Evolution 於 2012-1-19 20:06 發表
用緊1043nd 已經加左Port Triggering 3389
用192.168.1.x連得到 但係網外就連唔到
想問漏左邊部份settings未做?
Likely a firewall problem, using Kaspersky?
作者: Evolution    時間: 2012-1-19 20:12     標題: 回復 2# ccw 的帖子

用緊windows 7 內置firewall
需要加rules?

[ 本帖最後由 Evolution 於 2012-1-19 20:19 編輯 ]
作者: ccw    時間: 2012-1-19 20:33

引用:
原帖由 Evolution 於 2012-1-19 20:12 發表
用緊windows 7 內置firewall
需要加rules?
Yes, TCP 3389.
作者: Evolution    時間: 2012-1-19 21:47     標題: 回復 4# ccw 的帖子

聽日返工再試下
Thank you
作者: bebird    時間: 2012-1-19 22:39

Did u turn on remote desktop function? Default is turn off.
作者: ccw    時間: 2012-1-19 22:44

引用:
原帖由 bebird 於 2012-1-19 22:39 發表
Did u turn on remote desktop function? Default is turn off.
He can use via Lan but not Wan; that is the same case I encountered due to Kaspersky Firewall's blocking
作者: jackli    時間: 2012-1-19 23:04

咩client ?
windows 7 好似有特別認証.,,,...,
作者: ccw    時間: 2012-1-19 23:12

引用:
原帖由 jackli 於 2012-1-19 23:04 發表
咩client ?
windows 7 好似有特別認証.,,,...,
Ya, that is another problem, accessing using XP computer, you may need to disable NLA on server side.
作者: bebird    時間: 2012-1-20 00:18

引用:
原帖由 ccw 於 19/1/2012 23:12 發表

Ya, that is another problem, accessing using XP computer, you may need to disable NLA on server side.
Can install some addin in xp to enable secured connection to win7
作者: ccw    時間: 2012-1-20 00:25

引用:
原帖由 bebird 於 2012-1-20 00:18 發表

Can install some addin in xp to enable secured connection to win7
Tried with a friend but didn't get it worked, need updated client and tweak in registry......
While NLA doesn't really affects as it is used for defending DDoS, which is seldom the case one will need to deal with.
作者: jackli    時間: 2012-1-20 08:58

引用:
原帖由 ccw 於 2012-1-20 00:25 發表

Tried with a friend but didn't get it worked, need updated client and tweak in registry......
While NLA doesn't really affects as it is used for defending DDoS, which is seldom the case one will need ...
我本人就識過得的,
要sp3以上, 再改少少registry, 唔難
google 有教
作者: Evolution    時間: 2012-1-20 08:59

屋企機係windows 7 x64 公司機係windows XP
依家試左真係入唔到

[ 本帖最後由 Evolution 於 2012-1-20 09:03 編輯 ]
作者: bebird    時間: 2012-1-20 09:08

引用:
原帖由 ccw 於 20/1/2012 00:25 發表

Tried with a friend but didn't get it worked, need updated client and tweak in registry......
While NLA doesn't really affects as it is used for defending DDoS, which is seldom the case one will need ...
Description of the Remote Desktop Connection 7.0 client update for Remote Desktop Services (RDS) for Windows XP SP3, Windows Vista SP1, and Windows Vista SP2

This article discusses the Remote Desktop Connection (RDC) 7.0 client update that enables you to use the new Remote Desktop Services features. These features are introduced in Windows 7 and in Windows Server 2008 R2. These features are available for computers that are running Windows XP Service Pack 3 (SP3), Windows Vista Service Pack 1 (SP1), and Windows Vista Service Pack 2 (SP2).

The RDC 7.0 client can be used to connect to legacy terminal servers or to remote desktops as before. However, the new features that are mentioned in this article are available only when the client connects to a remote computer that is running Windows 7 or Windows Server 2008 R2.

http://support.microsoft.com/kb/969084
作者: bebird    時間: 2012-1-20 09:09

引用:
原帖由 Evolution 於 20/1/2012 08:59 發表
屋企機係windows 7 x64 公司機係windows XP
依家試左真係入唔到
win 7 to win xp, definitely can, coz I always use

win xp to win 7...
1. you need to make sure your win 7 use appropriate firewall (KAV or KIS can't... or need advanced settings), I use win 7 internal, it's ok
2. your win xp need sp3 + install RDC 7.0 which i mentioned above

[ 本帖最後由 bebird 於 2012-1-20 09:11 編輯 ]
作者: Evolution    時間: 2012-1-20 09:16     標題: 回復 15# bebird 的帖子

會唔會係router 未設定好呢
virtual service 我都加左3389了
作者: bebird    時間: 2012-1-20 09:19

引用:
原帖由 Evolution 於 20/1/2012 09:16 發表
會唔會係router 未設定好呢
virtual service 我都加左3389了
I'm not sure. I think in router, it's very easy, just add port forward to your PC ip address (if it's static)

you're win 7 connect to xp
or
xp connect to win 7?

for both cases, i can connect without any problem
作者: 小Ray    時間: 2012-1-20 09:25

如果係起 ftp , win7 個 firewall 就要 set 下
如果係 remote , 應該冇乜特別喎.. 係 router 果邊 set port 指返去邊部機 ip
作者: Evolution    時間: 2012-1-20 09:34     標題: 回復 17# bebird 的帖子

XP connect to windows 7
作者: bebird    時間: 2012-1-20 09:43

引用:
原帖由 Evolution 於 20/1/2012 09:34 發表
XP connect to windows 7
need to install this:
http://support.microsoft.com/kb/969084
作者: BlackBird    時間: 2012-1-20 17:22

如果已Flash DD-WRT用port range forwarding 3388-3390
DD-WRT個PF係痴痴地線

仲有你係咪當左Port forwarding係port triggering....

[ 本帖最後由 BlackBird 於 2012-1-20 17:23 編輯 ]
作者: ccw    時間: 2012-1-20 17:28

Just try to turn off NLA on server side.....
作者: jackli    時間: 2012-1-20 17:37

引用:
原帖由 BlackBird 於 2012-1-20 17:22 發表
如果已Flash DD-WRT用port range forwarding 3388-3390
DD-WRT個PF係痴痴地線

仲有你係咪當左Port forwarding係port triggering....
唔覺
系Port forwarding, tcp 3389 無錯
應該系negotiation 問題   
作者: BlackBird    時間: 2012-1-20 17:48

引用:
原帖由 jackli 於 2012-1-20 17:37 發表


唔覺
系Port forwarding, tcp 3389 無錯
應該系negotiation 問題   
引用:
原帖由 Evolution 於 2012-1-19 20:06 發表
用緊1043nd 已經加左Port Triggering 3389
用192.168.1.x連得到 但係網外就連唔到
想問漏左邊部份settings未做?

作者: Evolution    時間: 2012-1-20 18:39     標題: 回復 21# BlackBird 的帖子

我用緊原廠firmware的

[ 本帖最後由 Evolution 於 2012-1-20 19:18 編輯 ]
作者: Evolution    時間: 2012-1-20 19:32     標題: 回復 20# bebird 的帖子

已經裝左再試 都係唔得 (用埋virtual box install windows 7 連都係唔得)
依家係屋企用返wan/lan ip 連去都無問題
作者: Evolution    時間: 2012-1-20 19:32     標題: 回復 23# jackli 的帖子

請問如何fix 呢?
唔該ching
作者: ccw    時間: 2012-1-20 19:33

引用:
原帖由 Evolution 於 2012-1-20 19:32 發表
已經裝左再試 都係唔得 (用埋virtual box install windows 7 連都係唔得)
依家係屋企用返wan/lan ip 連去都無問題
係屋企用返wan/lan ip 連去都無問題

How did you try WAN?
And have you tried turning off NLA?
作者: Evolution    時間: 2012-1-20 19:35     標題: 回復 28# ccw 的帖子

打返HKBN比的IP 同router 比的IP落去都可以連到
作者: BlackBird    時間: 2012-1-20 20:07

引用:
原帖由 Evolution 於 2012-1-20 18:39 發表
我用緊原廠firmware的
明顯地set錯野

入Virtual servers

IP : 你部野IP
Port : 識做啦
作者: BlackBird    時間: 2012-1-20 20:08

引用:
原帖由 Evolution 於 2012-1-20 19:35 發表
打返HKBN比的IP 同router 比的IP落去都可以連到
內連唔關事...
作者: Evolution    時間: 2012-1-20 20:19     標題: 回復 31# BlackBird 的帖子

本身已經有加落去
作者: jackli    時間: 2012-1-20 20:35

不如你試下LAN 網到先,
再出WAN LA
作者: bondleung    時間: 2012-1-20 22:50

我用kaspersky IS + 941ND + Win 7 Pro
做左3樣野 ...
1. 開forwarding rule
2. 開remote desktop settings  : Allow connections from computers running any version ..
3. 放kaspersky 既3389 port
作者: Evolution    時間: 2012-1-20 22:51

最尾enable DMZ + close firewall 搵朋友試得左




歡迎光臨 HKSpot (https://bbs.hk-spot.com/) Powered by Discuz! 6.0 Lite