原帖由 tamalemon 於 2012-10-8 12:46 發表
自己睇下廣告
http://www.mobile01.com/topicdetail.php?f=501&t=2166632&p=1
我唔會阻人用, OEM一間, 評價呈少有正有負
純個人感覺, 萬一DIY時冇牛用, 我領願等, 甚至放棄DIY, 自己經驗係一定晤會 ...
It may have high efficiency and fairly good ripple/noise suppression but voltage regulation at +12V and 3.3V is loose and its performance at Crossload tests was terrible. When we pulled 60A from +12V during the CL2 test, this rail's voltage dropped dangerously low. In my opinion FSP should take a look at this matter and find a solution for the poor performance at Cross Load tests. Load on the rails won't be equally balanced in any system, so this improvement would have a positive effect.
原帖由 bebird 於 2012-10-8 17:00 發表
so which one has high efficiency, good quality and reasonable price?
原帖由 bebird 於 2012-10-8 17:00 發表
so which one has high efficiency, good quality and reasonable price?
原帖由 BlackBird 於 2012/10/8 23:49 發表
唔高火數根本用DC-ATX最實際
要高火數又要平寧願唔望果幾%買HCG算
低過40w的idle loading所有Gold再高efficiency都係垃圾,結構問題
歡迎光臨 HKSpot (https://bbs.hk-spot.com/) | Powered by Discuz! 6.0 Lite |