dom

CoreTemp said 50C  but I can feel it slowing the multi-task..
CoreTemp also report clock frequency drop to 3.8GHz more often

dom

Disabled Turbo Core
Much better Thermal Control now

qcmadness

Should not be 50 C

dom

Disable Turbo Core is better but performance loss a bit

But today I will change to FX-6300
I really need 6 thread or more

[ 本帖最後由 dom 於 2013-1-26 11:54 編輯 ]

bebird

引用:

原帖由 dom 於 26/1/2013 11:51 發表
Disable Turbo Core is better but performance loss a bit

But today I will change to FX-6300
I really need 6 thread or more

Give up APU

dom

換翻 FX-6300
頂
同一隻Heatsink 乜事都無

lctang

會唔會係個皮同粒 DIE 痴得唔好...

試下起皮直接 heat shink

dom

引用:

原帖由 lctang 於 2013/1/27 23:35 發表
會唔會係個皮同粒 DIE 痴得唔好...

試下起皮直接 heat shink

唔起了 換左 FX-6300 6thread 更好用

bebird

引用:

原帖由 dom 於 28/1/2013 00:18 發表
唔起了 換左 FX-6300 6thread 更好用

but why not use back yr 1090T? faster la!

dom

引用:

原帖由 bebird 於 2013/1/28 10:02 發表


but why not use back yr 1090T? faster la!

125W TDP is too stressful for mATX board

bebird

引用:

原帖由 dom 於 28/1/2013 10:21 發表
125W TDP is too stressful for mATX board

oicic...

then 6300 is ok.
for multi-thread 6300 < 1045T
for single-thread 6300 > 1045T

right?

qcmadness

引用:

原帖由 bebird 於 2013-1-28 10:46 發表

oicic...

then 6300 is ok.
for multi-thread 6300 < 1045T
for single-thread 6300 > 1045T

right?

both 6300

dom

引用:

原帖由 bebird 於 2013/1/28 10:46 發表

oicic...

then 6300 is ok.
for multi-thread 6300 < 1045T
for single-thread 6300 > 1045T

right?

FX-6300 win both

bebird

引用:

原帖由 dom 於 28/1/2013 19:00 發表


FX-6300 win both

So, not bad. But cpu performance is far better than 5800k

alextamly

冇晒5800K...我買左5700....開o黎做testing 玩server2012...ITX機...