打印

[硬件] Shader Model 3.0

Shader Model 3.0

Shader Model (Pixel Shader + Vertex Shader) 3.0相比起2.0有以下改進:
1. Pixel Shader Length由96加到65535+
2. Vertex Shader Length由96加到65535+
2. 加入Dynamic Branching
3. 要求有32-bit rendering
4. 要求有Instancing Support, 可以用同一條command畫多過一點Vertex

基本上SM 3.0比2.0多出既主要係功能方面,
畫質唔係影響好大.

至於點解話SM 3.0係6600以下既hardware冇咩用時,
我搵關於SM 3.0 support果陣時, Farcry根本搵唔到
好多關於6200既benchmark, 好可能速度根本唔夠,
令我想起FX5200要用SM 1 Path行game.
所以我會conclude為6200有冇SM 3.0都冇用.

References:
1. Tom\'s Hardware Guide
http://graphics.tomshardware.com
2. AnandTech
http://www.anandtech.com
3. X-bit labs
http://www.xbitlabs.com
4. Microsoft
http://www.microsoft.com/whdc/wi ... model30_NVIDIA.mspx

TOP

SM3.0 is not bad ga~
The only issue is it\'s not a must (nor a useful feature) for today

TOP

引用:
Originally posted by trentcys at 2005-7-1 02:56:
SM3.0 is not bad ga~
The only issue is it\'s not a must (nor a useful feature) for today
而家用唔著, 到要用得著果陣時,
果d卡都會平好多......

我買hardware次次都係快人半拍, 成日買貴野

TOP

引用:
Originally posted by qcmadness at 2005-7-1 02:58:


而家用唔著, 到要用得著果陣時,
果d卡都會平好多......

我買hardware次次都係快人半拍, 成日買貴野
當年$1.8k買左Radeon8500睇住佢暴跌
自此學識左比人慢半拍買hardware

TOP

引用:
Originally posted by trentcys at 2005-7-1 03:01:


當年$1.8k買左Radeon8500睇住佢暴跌
自此學識左比人慢半拍買hardware
我既紀錄
1. P3 1GHz (Coppermine) @ $2K
2. Linksys 8.02.11b with USB receiver @ $1.3K
3. 128MB USB Flash Drive @ $278
:crouch::crouch::crouch:

TOP

引用:
Originally posted by qcmadness at 2005-7-1 03:03:


我既紀錄
1. P3 1GHz (Coppermine) @ $2K
2. Linksys 8.02.11b with USB receiver @ $1.3K
3. 128MB USB Flash Drive @ $278
:crouch::crouch::crouch:
真係好。。。勁:crouch:最後嗰2樣


英國代購 ~ 歡迎查詢

TOP

引用:
Originally posted by trentcys at 2005-7-1 03:01:


當年$1.8k買左Radeon8500睇住佢暴跌
自此學識左比人慢半拍買hardware
6600 series 都將會跌啦~

6600:  ~900>~600
6600GT: ~1400>~900

不過都玩左好耐lu~

TOP

引用:
Originally posted by qcmadness at 2005-7-1 03:03:


我既紀錄
1. P3 1GHz (Coppermine) @ $2K
2. Linksys 8.02.11b with USB receiver @ $1.3K
3. 128MB USB Flash Drive @ $278
:crouch::crouch::crouch:
好左我果陣買唔倒o者~

講起第三樣,有一次坐巴士我執倒一條~

TOP