打印

[硬件] X86 router NAT performance w/ Atom board? The ANS is NO.

引用:
原帖由 jackli 於 2011-11-21 13:34 發表


http://en.wikipedia.org/wiki/Conventional_PCI
Oh I know why, I wrongly read it as b instead of B.
Then they are all fine.

Now my expected system:
Intel D525 board + Intel 1000 GT + Intel WiFi Link 6300 + Others accessories.
Hopefully I can get the above for ~$1200.

[ 本帖最後由 ccw 於 2011-11-21 14:00 編輯 ]

TOP

引用:
原帖由 jackli 於 2011-11-21 13:57 發表


不過記著 ,..,,.pci 個 133MB/s系好理論... 實際系無133MB/s
唔似pci-e x1 有 150MB/s...
~>90MB/s I am ok

Thanks a lot for all of your sharing.

TOP

Sigh, just found that Intel's own D525 is not using Intel Lan controller, then I don't have to limit my own choice to Intel now.
Probably will wait for the ASUS D2700 board instead.

In case I have 1 port of Realtek controller,
another port of Intel Controller,
does it make any difference for which one to use as WAN port?

TOP

引用:
原帖由 lctang 於 2011-11-21 15:29 發表


intel wifi driver on linux = 0
go ar or RT

But it looks I don't have another slot other than Mini-Card for WiFi........cause the desired form factor is ITX.
That means I have to pick a dual port board.

Using USB adapter?
Any suggestion(better compatibility is preferred) are welcome, as the wifi is just to for iPad something.

[ 本帖最後由 ccw 於 2011-11-21 16:04 編輯 ]

TOP

引用:
原帖由 jackli 於 2011-11-21 16:51 發表


你找D寫明十卜linux unix 實無死la
Probably I will buy a cheap cheap USB WiFI stick, but now I will let my friend get me a Intel Pro1000 CT first probably,
btw, can I use only a dual port Intel Lan card to set the Lan+Wan Port, or I must need two different controller?
Thanks.

TOP

引用:
原帖由 lctang 於 2011-11-21 22:15 發表
Dual port is ok
As I actually found some old Intel Pro 1000 MT in SSP,
do you think if they are capable?

Updated : It looks MT is of PCI-X.....

[ 本帖最後由 ccw 於 2011-11-21 22:38 編輯 ]

TOP

引用:
原帖由 jackli 於 2011-11-21 22:50 發表


dual port, pci-e 4x 咪ok lor lor~
I just don't want to overkill with this router.
If it is to cost > 1200, then I will buy from ASUS.........

TOP

引用:
原帖由 jackli 於 2011-11-21 23:03 發表


pci-x 都ok, 1064 MB/s
pci 都有
133 MB/s (32-bit at 33 MHz)
266 MB/s (32-bit at 66 MHz or 64-bit at 33 MHz)
533 MB/s (64-bit at 66 MHz)

;

不過我話pci 唔系好足姐
因為好多因素:banana ...
Probably I will use Realtek Onbard + Intel Card solution,
but my question is that, is there any difference for me to make the Intel Port or Realtek port as the WAN port, in terms of CPU utilization?

TOP

引用:
原帖由 jackli 於 2011-11-21 23:13 發表
如果你手上有料, 就試左先la...
x86 絕對快過 router cpu 比如話:AR9132,BCM4705

當然你用咩os, 點set 都好有關系
I have nothing comparable to Atom,
but on studying I do think Atom won't be the bottleneck, so probably I will get the X86 router as proposed.

While another issue is on the OS,
Router OS costs, and I may not be using it.
I am not sure if other Router OS would have good NAT performance.

TOP

引用:
原帖由 jackli 於 2011-11-21 23:29 發表
cheap cheap wzr-hp-g300nh 都食得哂gigalan la,
一條連線真系食唔哂,, 可能要fine tune
Giga lan is fine on my router too, while the question on the WAN<-->Lan

TOP

引用:
原帖由 lctang 於 2011-11-21 23:31 發表
我咪e-350 + mt @ PCI 32bit
睇我用 clearOS Nat 大約幾多
Would you mind listing the hardware model you are using for reference?
Thank you.

TOP

引用:
原帖由 jackli 於 2011-11-21 23:37 發表


到你試果陣, 用pci 卡做wan, onboard 做lan
Thank you for your hints

TOP

引用:
原帖由 lctang 於 2011-11-22 00:10 發表
Q9450>> Marvell 8056 >> giga >> switch >> giga >>淘寶貨 intel 1000MT @pci 32bit - pc outer >> giga >> modem

firewall 問題...
Any suggested switch ? Preferred Brand?

TOP

引用:
原帖由 lctang 於 2011-11-22 00:29 發表
用緊呢隻 switch
http://www.planex.com.tw/product/soho/switch/fxg-08ep.htm
Looks good
http://www.planex.com.tw/product/soho/switch/fxg-05ep.htm
And this should suffice my need, available in SSP?

While I may also run the current WZR as switch to see if that is ok before getting a new one

TOP

引用:
原帖由 lctang 於 2011-11-22 00:53 發表
pc1, pc2, AV amp, Fon ap, E4200 >> switch >> giga >> PC router
not pc1, pc2, AV amp, Fon ap, >> E4200 or switch >> giga >> PC router
So complicated

My case will be
iPad, Brother's computer, Any phone >> :0) Router
:0) Router + Server + My notebook >> Switch >> Proposed PC Router >> BB1000

Giga = Cat6?

TOP