dom

由於死人 ASUS M3A79-T DELUXE 沒有支援 六核 BIOS
是次測試差點無AM3 板可試


特別鳴謝 JUNMAX 代理借出 Biostar TA890GXE 作測試用途

Testing Coming Soon !!

dom

1055T 粒 U 幾正
六核原先我諗住會好食電,  Idle 都食 100W , 點知......意想不到
用電閒置  70W 都無  ( Watt meter 成日跌到 60W 添......癡線 !)

六核Full load 我行 Onboard 890GX (HD4290) , 配 1x SATA HDD + 1x IDE DVD Writer
都係 150W~155W 左右

Full load 溫度就同 Phenom II x4 超左3.7GHz 之後差唔多
依家用緊原裝玩住先
- Phenom II x6 Stepping 係 "E0" 黎
- 唔係 C3 / D0 , AMD 又出左新 Stepping
- CPU-Z 暫時認唔到 Stepping 淨出 "0"  

[ Last edited by dom on 2010-4-13 at 00:27 ]

dom

Here you go

[ Last edited by dom on 2010-4-13 at 20:59 ]

dom

Updated

[ Last edited by dom on 2010-4-13 at 22:51 ]

dom

RESERVED

dom

CPU-Z Validated !
http://valid.canardpc.com/show_oc.php?id=1130956
- Weird .......the VCore is higher than I expected , maybe new BIOS will fix it?
- Stepping 0 ?? , not C3 or D0 , another new stepping???
- Maybe this is the low-end Hexa Core model, only 2GHz HyperTransport speed

Idle Power Consumption Updated : With C1E Enable , Cool & Quiet Enable
My Wattage meter measure "Idle" (800MHz) consumption only runs around 60W
when Full load six-core, it goes up to 145~150W

I haven\'t check the temp and do the overclock yet (Stock Fan only)
Full load six core have similar "heat" as my C2 P2 955BE @ 3.7GHz at full load

For the bench, I don\'t know I should post them yet as "NDA" haven\'t end yet

I got Cinebench R10 done, Fritz Chess done (Stock speed)
Cinebench R10

Render 1x CPU 2925
Render x CPU * 12774
Multiprocessor speedup 4.37x

Is that good ?

dom

Updated some info

dom

Turbo CORE WORK !!!
2.8GHz -> if not full load Hexa Core wil BOOST to 3.3GHz (Automatic)

Nice

dom

引用:

Originally posted by sniperX at 2010-4-13 01:10:


full load means run 6 thread simultaneously?

Yes , Full load 6 core together

dom

Biostar 890GX is GOOD  , fun board to OC with !!

dom

引用:

Originally posted by sniperX at 2010-4-13 01:10:


full load means run 6 thread simultaneously?

yep
but if you don\'t use > 3 core full load
the Turbo Core will activate

dom

Max Stable Bench = 3.8~3.9GHz

[ Last edited by dom on 2010-4-14 at 02:49 ]

dom

引用:

Originally posted by tamalemon at 2010-4-14 09:19:


3x 3.3G cores?

Yes
HTT 220 ~ 240 is easy , with Turbo Core Enable you can get 3x 4GHz

dom

Max out @ 4.22GHz

dom

wPRIME 32M @ 4.2GHz
行多兩次都會死