打印

[硬件] qc wanted... or if others can answer my question

qc wanted... or if others can answer my question

will make A10-5700 + ASRock ITX
thinking to buy new ITX case now...

coz I wanna buy Lian-Li PC-Q02, and it says "CPU cooler height: 60mm"
I saw in qc's post, you use PC-Q02 also...
1. original CPU fan, what's the height?
2. I've 獅王 heatsink, which can use in AM3 MB, also can use in FM2 socket? can suppress the heat?
3. your PC in full load, noisy and hot? coz it has no system fan

Other bros... any other small case can recommend?
I need...
1. 1 * 3.5" SATA + 2 * 2.5" SATA (hard disk can 平放)
2. width 15cm or less
3. power supply 150W or higher coz qc's testing is around 110W is requireed



[ 本帖最後由 bebird 於 2012-11-16 17:29 編輯 ]

TOP

引用:
原帖由 qcmadness 於 16/11/2012 20:43 發表
Original HSF + PC-Q02 = suicide

PC-Q02 is for 35W CPU or below
so, u change other heatsink? or change case?

TOP

引用:
原帖由 qcmadness 於 16/11/2012 20:55 發表

Use AMD 95W HS modified fan to blow upward
is blow upward better than downward?

TOP

引用:
原帖由 qcmadness 於 16/11/2012 21:22 發表
Bear in mind that the only ventilation for PC-Q02 is the PSU fan
yes, i knew, thx

TOP

so maybe need to search another case

TOP

引用:
原帖由 qcmadness 於 16/11/2012 22:48 發表

at least pc-q03 if you want better ventilation
i want slim case + 平放hard disk
the width of q03 is wider than my existing matx case

[ 本帖最後由 bebird 於 2012-11-16 23:02 編輯 ]

TOP

引用:
原帖由 qcmadness 於 16/11/2012 23:03 發表

then nearly no choices...
or i should use 35w i3
give up better onboard display

TOP

引用:
原帖由 dom 於 17/11/2012 10:02 發表


TRY look for INWIN BM639

TOP

引用:
原帖由 qcmadness 於 17/11/2012 19:56 發表
http://store.antec.com/Product/e ... 761345-15121-4.aspx

如果真係in stock, 我recommend呢隻, 除左無得裝3.5" hdd
similar as yr old ITX case?

TOP