tamalemon

自己睇下廣告
http://www.mobile01.com/topicdet ... p;t=2166632&p=1

我唔會阻人用, OEM一間, 評價呈少有正有負
純個人感覺, 萬一DIY時冇牛用, 我領願等, 甚至放棄DIY, 自己經驗係一定晤會再用
若見廠機用佢亦打個突重新考慮, 但至少唔會好似DIY時諗都唔諗。

補充 : 供電我唔識的 , 我只係怕麻煩而已。 所以以今日DIY牛如此貴的日子, 只偏重信心呢一點去揀牛。

[ 本帖最後由 tamalemon 於 2012-10-8 12:56 編輯 ]

tamalemon

引用:

原帖由 BlackBird 於 2012-10-8 15:39 發表
論用料，FSP絕對唔會係Retail牛比好野落去

論IC/設計，FSP就真係一絕

結論即係?

tamalemon

引用:

原帖由 BlackBird 於 2012-10-8 15:37 發表

唔識，咪google到識為止

Goo一下~ 有AURUM 750 report


http://www.techpowerup.com/reviews/FSP/Aurum_CM_750W/9.html

引用:

It may have high efficiency and fairly good ripple/noise suppression but voltage regulation at +12V and 3.3V is loose and its performance at Crossload tests was terrible. When we pulled 60A from +12V during the CL2 test, this rail's voltage dropped dangerously low. In my opinion FSP should take a look at this matter and find a solution for the poor performance at Cross Load tests. Load on the rails won't be equally balanced in any system, so this improvement would have a positive effect.

我冇乜野學到, 唔識就係唔識~

而且對於見佢死牛的歷史, goo完暫時無乜幫助

tamalemon

引用:

原帖由 BlackBird 於 2012-10-8 15:45 發表

從efficiency望，買
用料上，唔買

車~ 咁搞我去goo咁耐仲有分別咩~

tamalemon

引用:

原帖由 BlackBird 於 2012-10-8 15:37 發表

信心唔可以當飯食
經驗更加係會矇騙雙眼的東西

我就係認衰, 絕對不會再胡亂受矇騙
所以我寧願唔砌, 呢隻一定唔用

[ 本帖最後由 tamalemon 於 2012-10-8 17:32 編輯 ]

tamalemon

引用:

原帖由 bebird 於 2012-10-8 17:00 發表

so which one has high efficiency, good quality and reasonable price?

x2

tamalemon

引用:

原帖由 BlackBird 於 2012-10-8 23:45 發表

你唔Google就唔會知FSP wattage rating囉得盡 / cross-reg差，經驗與信心會告知你此？

玩咩
佢有幾可出零售版得過？

仲有，佢最大鑊果方面根本冇得test