ccw

Actually, to what extent can an Atom board(D525) router offers?
In terms of NAT performance(main concern), can it reach 1000Mbit/s?

Besides getting a readily available router, software router maybe considered if its performance is high enough.
On viewing some advertisement, Atom board router can handle up to 550Mbit/s NAT, is it all it can give?
And I must need a like a G620T for the desired router?

Or another solution, direct connect to server and set the router inside it?
Any suggestion are welcome.

[ 本帖最後由 ccw 於 2011-12-1 09:25 編輯 ]

jackli

引用:

原帖由 ccw 於 2011-11-20 20:20 發表
Actually, to what extent can an Atom board(D525) router offers?
In terms of NAT performance(main concern), can it reach 1000Mbit/s?

Besides getting a readily available router, software router maybe c ...

睇你咩com chip..
x86 絕對夠 handle 125MB/s 的,
睇你咩com chip 同os

cc this:
http://tw.network01.net/modules/ ... _id=237&forum=6

[ 本帖最後由 jackli 於 2011-11-20 20:50 編輯 ]

ccw

引用:

原帖由 jackli 於 2011-11-20 20:48 發表


睇你咩com chip..
x86 絕對夠 handle 125MB/s 的,
睇你咩com chip 同os

cc this:
http://tw.network01.net/modules/ ... _id=237&forum=6

Thanks for the info,
but in that sharing, the max NAT is around 250 Mbps,
Do you know if Atom D525 can handle BB1000 without losing much bandwidth?

D525's tdp is around 13W, it looks getting a G630T (TDP 35W) has no great difference from it.

[ 本帖最後由 ccw 於 2011-11-20 20:54 編輯 ]

ccw

Just found this,
J&W Minix ITX C7M1026 motherboard

http://news.softpedia.com/news/I ... arance-215645.shtml

Looks a good board for Router, reading reviews.

Would those Realtek Lan cards an obstacle to performance?

[ 本帖最後由 ccw 於 2011-11-20 21:03 編輯 ]

qcmadness

atom d525 can handle dual gb wan

ccw

引用:

原帖由 qcmadness 於 2011-11-20 21:06 發表
atom d525 can handle dual gb wan

Thank you for your promising ans,

But now D2700 looks more handsome
http://www.netbooklive.com/intel ... -comparisons-12025/

jackli

引用:

原帖由 ccw 於 2011-11-20 20:52 發表

Thanks for the info,
but in that sharing, the max NAT is around 250 Mbps,
Do you know if Atom D525 can handle BB1000 without losing much bandwidth?

D525's tdp is around 13W, it looks getting a G630 ...

你有冇試過玩atom, 玩raid or ssd 對抄? 125MB/s 絕對唔系問題...
買張貴DUAL LAN PCI-E x 8  EVEN x16 包你做到,
當然, 到時你一定要行raid OR RAMDISK, 125MB/s 平均速度trad harddisk做唔到test OR 實際用

ccw

引用:

原帖由 jackli 於 2011-11-20 21:15 發表


你有冇試過玩atom, 玩raid or ssd 對抄? 125MB/s 絕對唔系問題...
買張貴DUAL LAN PCI-E x 8  EVEN x16 包你做到,
當然, 到時你一定要行raid OR RAMDISK, 125MB/s 平均速度trad harddisk做唔到test OR 實際用 ...

Not really, I had a very poor impression after touching them once(N270 at the moment).
I don't need any harddisk on it, I will use USB Flash Drive to install OS, it will be a router only.

買張貴DUAL LAN PCI-E x 8  EVEN x16 包你做到,
Is this a must?
Or I can do this with Realtek onboard lan?

[ 本帖最後由 ccw 於 2011-11-20 21:19 編輯 ]

jackli

用MikroTik routeros + x86 + pciex4 包你實快
其實p4 都做到, 不過佢個pci慢, pci-x 又先剛剛夠.,.,,.

未有pcie <-> south bridge 依家咁快

[ 本帖最後由 jackli 於 2011-11-20 21:28 編輯 ]

ccw

引用:

原帖由 jackli 於 2011-11-20 21:27 發表
用MikroTik routeros + x86 + pciex4 包你實快
其實p4 都做到, 不過佢個pci慢, pci-x 又先剛剛夠.,.,,.

未有pcie  south bridge 依家咁快

I see, thank you for your sharing,
probably will wait to get a D2700 embedded board first.

jackli

引用:

原帖由 ccw 於 2011-11-20 21:31 發表

I see, thank you for your sharing,
probably will wait to get a D2700 embedded board first.

不過我都系好懶...
用wzr-hp-g300nh做哂所有野...


PID USER VSZ STAT COMMAND
1 root 1068 S /sbin/init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
48 root 0 SW< [kblockd/0]
58 root 0 SW< [khubd]
74 root 0 SW [pdflush]
75 root 0 SW [pdflush]
76 root 0 DW< [kswapd0]
77 root 0 SW< [aio/0]
609 root 0 SW< [mtdblockd]
640 root 0 SW< [scsi_eh_0]
641 root 0 SW< [usb-storage]
658 root 1484 S watchdog
784 root 1448 S resetbutton
873 root 1008 S telnetd
894 root 616 S pptpd -c /tmp/pptpd/pptpd.conf -o /tmp/pptpd/options.
897 root 628 S cron
907 root 1140 S ttraff
910 root 744 S dnsmasq --conf-file=/tmp/dnsmasq.conf
922 root 1008 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_ho
924 root 1356 S proftpd: (accepting connections)
1135 root 2464 S httpd -p 80
1652 root 628 S udhcpc -i eth1 -p /var/run/udhcpc.pid -s /tmp/udhcpc
1655 root 0 SW< [kjournald]
1667 root 34456 S amuled -c /mnt/root/.aMule -f
1668 root 34456 S amuled -c /mnt/root/.aMule -f
1669 root 34456 S amuled -c /mnt/root/.aMule -f
1671 root 34456 S amuled -c /mnt/root/.aMule -f
1672 root 8936 S amuleweb --amule-config-file=/mnt/root/.aMule/amule.c
1674 root 34456 S amuled -c /mnt/root/.aMule -f
1687 root 744 S /opt/usr/sbin/p9100d -b -f /dev/usb/lp0 0
1693 root 2484 S N /opt/bin/smbd -s /opt/etc/samba/smb.conf
1700 root 3960 S transmission-daemon -g /mnt/root/.config/transmission
1701 root 3960 S transmission-daemon -g /mnt/root/.config/transmission
1702 root 3960 S transmission-daemon -g /mnt/root/.config/transmission
1703 root 3960 S transmission-daemon -g /mnt/root/.config/transmission
1706 root 1176 S sh sh02.sh
1715 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1718 root 3640 S lighttpd -f /opt/etc/lighttpd/lighttpd.conf -m /opt/u
1719 root 7768 S /opt/usr/bin/php-cgi
1720 root 7768 S /opt/usr/bin/php-cgi
1721 root 7768 S /opt/usr/bin/php-cgi
1722 root 7768 S /opt/usr/bin/php-cgi
1730 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1731 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1732 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1733 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1734 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1735 root 8104 S /opt/usr/bin/php-cgi
1736 root 7768 S /opt/usr/bin/php-cgi
1737 root 7768 S /opt/usr/bin/php-cgi
1738 root 7840 S /opt/usr/bin/php-cgi
1757 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1758 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1759 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1760 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
1764 root 34456 S amuled -c /mnt/root/.aMule -f
5152 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
5153 root 40444 S /mnt/opt/usr/bin/mysqld --defaults-file=/etc/my.cnf
14717 root 1140 S process_monitor
14721 root 844 S inadyn -u -p  --input_file /tmp/ddns
14856 root 1204 S upnp -D -W eth1
16169 root 1168 S sleep 60
16189 root 1176 S sh -c ps
16190 root 1176 R ps

ccw

引用:

原帖由 jackli 於 2011-11-20 21:37 發表


不過我都系好懶...
用wzr-hp-g300nh做哂所有野...


PID USER VSZ STAT COMMAND
1 root 1068 S /sbin/init
2 root 0 SW< [kthreadd]
3 root 0 SW< [ksoftirqd/0]
4 root 0 SW< [events/0]
5 root 0 SW< [khelper]
...

I am using the same, but it seems it is too slow for BB1000

[ 本帖最後由 ccw 於 2011-11-20 21:45 編輯 ]

qcmadness

引用:

原帖由 ccw 於 2011-11-20 21:13 發表

Thank you for your promising ans,

But now D2700 looks more handsome
http://www.netbooklive.com/intel ... -comparisons-12025/

d2700 will need a properly threaded OS to beat e-350

ccw

引用:

原帖由 qcmadness 於 2011-11-20 21:45 發表

d2700 will need a properly threaded OS to beat e-350

D2700 w/o HT < E-350?

qcmadness

引用:

原帖由 ccw 於 2011-11-20 21:56 發表

D2700 w/o HT < E-350?

The Cinebench one