dom

引用:

原帖由 BlackBird 於 2011/7/17 12:18 發表
no tower-heatsink on stability-oriented system...

How about AXP140

ccw

引用:

原帖由 dom 於 2011-7-17 13:34 發表


How about AXP140

Just searched a bit for this, it looks it could block the ram slots......
Using this MB(ASUS P8B WS):


[ 本帖最後由 ccw 於 2011-7-17 13:38 編輯 ]

BlackBird

引用:

原帖由 ccw 於 2011-7-17 13:34 發表

At the moment I am only planning for the CPU, I am not using a discrete display.

voltage regulator/ram/blahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblah

ccw

引用:

原帖由 BlackBird 於 2011-7-17 13:50 發表



voltage regulator/ram/blahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblahblah

I am not sure, please let me know if those ram and voltage regulator(isn't it already having some heat sink?) needs also cooling system.

qcmadness

引用:

原帖由 ccw 於 2011-7-17 13:55 發表

I am not sure, please let me know if those ram and voltage regulator(isn't it already having some heat sink?) needs also cooling system.

the heatsink are not very good and you need fan if you need absolute stability

ccw

引用:

原帖由 qcmadness 於 2011-7-17 14:04 發表


the heatsink are not very good and you need fan if you need absolute stability

Not really such a serious matter, I don't have plans for modification on the mainboard yet, at least not now.
I may replace those heatsinks when I find them an issue.

qcmadness

引用:

原帖由 ccw 於 2011-7-17 14:13 發表

Not really such a serious matter, I don't have plans for modification on the mainboard yet, at least not now.
I may replace those heatsinks when I find them an issue.

if you use tower hs, then the cpu fan cannot cool it
if you use normal one, the cpu fan can cool the pwm

ccw

引用:

原帖由 qcmadness 於 2011-7-17 14:14 發表

if you use tower hs, then the cpu fan cannot cool it
if you use normal one, the cpu fan can cool the pwm

I see, thank you for telling, I am now considering non-tower cooler.

BlackBird

引用:

原帖由 ccw 於 2011-7-17 13:55 發表

I am not sure, please let me know if those ram and voltage regulator(isn't it already having some heat sink?) needs also cooling system.

simple talk
heatsink is useless when nothing diffusing the heat

[ 本帖最後由 BlackBird 於 2011-7-17 14:28 編輯 ]

ccw

Thanks for the idea,
I will probably make a decision based on the situation of the mainboard later.
Can't even figure out would the heatsinks and cooling fans fit without the mainboard at hand.

lctang

一體水冷係唔要換水

ref
http://www.techorz.com/hardware/ ... id-cooling-compare/

$ = 400
http://www.price.com.hk/product.php?p=121460

ccw

how about this?
http://www.price.com.hk/product.php?p=128235

Actually water cooling is ok,(if the installation and maintenance is that easy)
but I will need to think of mosfet and chipset cooling later.
Probably will install these:
Mosfet: http://www.pcbulb.com/index.php?main_page=index&cPath=68_217
Ram: http://www.pcbulb.com/index.php? ... mp;products_id=1766
C206: http://www.pcbulb.com/index.php? ... mp;products_id=1745

But all depends on budget and compatibility(I will need to check exactly the room )

ccw

Damn, Wai Fong is no longer selling mosfet and ram heatsink........
Do you know where I can find them in HK?

Btw, I will probably use this:
Scythe Zipang 2 SCZP-2000
So that the small heat sink of mosfet can be looked after.

The Chipset heatsink is still available.

ccw

Just spot this
http://www.hkepc.com/forum/viewt ... p;extra=&page=1

But too heavy and probably will bend the mb......

ccw

Passive cooler
Thermalright HR-05 IFX
http://www.thermalright.com/new_ ... cooler_hr05_ifx.htm
vs
Active cooler
Thermaltake Spirit A100 Northbirdge Chipset Cooler CLC0051
http://www.crazypc.com/products/CLC0051.html

Which one would be better?

And also the same question on ram and other components.