打印

[硬件] Standard 1.5V DDR3 on Skylate is not recommended

Standard 1.5V DDR3 on Skylate is not recommended

http://www.tomshardware.com/news/skylake-memory-support,30185.html
引用:
Skylake's IMC officially supports only DDR3L with a voltage of 1.35, and it officially supports DDR4 at 1.2 V. This might seem a little counter-intuitive to some users, as the entire reason for continuing DDR3 support is to make it cheaper and easier for customers to upgrade to the new Skylake platform, but these voltages are likely used to avoid damaging the IMC. Although it would be nice to use any DDR3 from 1.35 V - 1.65 V, running at these higher voltages could burn out the IMC and kill the processor over time.

TOP

仲諗住用 DDR3砌 ITX

TOP

好心掩埋個DDR3L 佢啦. 橫掂大部份人都係要買過.

TOP

Nehalem 夠話 1.65啦...
"All animals are equal, but some animals are more equal than others."

TOP

引用:
原帖由 BlackBird 於 2015-9-30 16:33 發表
Nehalem 夠話 1.65啦...
初代i5 / i7好多咪死IMC

TOP

唔加電都死架啦
"All animals are equal, but some animals are more equal than others."

TOP

咁我要用 DDR3 配 Skylake
天然系長髮眼鏡娘 最高
Lucky Star 聯盟 - 美幸
Kancolle - 大淀, 翔鶴 (太太), 烏海 , 瑞鶴

TOP